Split Heat Pipe Solar Water Heater
General product information
Working Principle of Split Heat Pipe Solar Water Heater:1) Firstly, the water tank shall be filled with cold water, the collector loop be filled with heat-conducting liquid
2) The liquid in collector will be heated with solar heat pipe collector absorbing solar radiation
3) When temperature discrepancy sensed between solar collector and water tank reaches set value in controller, the controller shall start the circulation pump automatically
4) The circulation pump makes heat-conducting liquid circulate in the loop
5) The heat-conducting liquid transfers heat to water by copper coil installed in water tank
6) In case the temperature in storage tank does not reach set value in the controller, then the auxiliary heating device would start to assist solar water heating
7) When temperature sensed in storage tank reaches the set value in controller, the circulation pump or electric heater shall stop automatically
8) In this way the water in storage tank get heated enough as expected
Accessories:
1) Electrical heater, as an auxiliary heating element in case of raining or snowing days so as to ensure a continous hot water supply
2) Anode magnesium Bar: soften hard water in system so as to protect storage tank and copper coil from water scale effectively
3) T/P valve, Stainless bolts & nuts, anti-aging rubber seal, pipe holder make their life as long as other parts of the system
Warranty:
3 years international responsibility for integrated system and 15 years for glass vacuum tubes due to original quality problems